199 yuan： hammer P1000 two-way fast charging mobile power supply evaluation： alternative solution
Content navigation:
On May 9th, the largest cross talk program in the mobile phone industry was ushered in: the Hammer Spring New Product Launch, and Lao Luo’s head pill launched the dual-camera nut Pro amidst various cheers. The next few days were all about consumers’ after-dinner topics.
The hammer also has another blockbuster product that was not announced at the press conference. It is the hammer P1000 two-way fast charging mobile power supply.The serious white and gray overtones hide a very powerful performance. According to the spy introduction, the hammer uses a relatively rare scheme.
Unpacking:
The hammer P1000 two-way fast charging mobile power supply is priced at 199 yuan in the official mall, which is full of "feelings". The product packaging uses a white carton, and there is nothing else except a bright red hammer logo.
Information parameters at the bottom of the package, product name: 10000mAh two-way fast charging mobile power supply, model: P1000, input interface: Type-C, output interface: USB-A, input parameters: 5V3A/9V2A/12V1.5A, output parameters: 5V3A/9V2A/12V1.5A, battery capacity: 10000mAh/38.5Wh, Beijing Hammer Digital Technology Co., Ltd.
List of unpacked items: Type-A to Type-C output short line x1, mobile power supply body x1, manual x1.
The appearance of the whole can be divided into 3 pieces of plastic material shell, the top is pure white, the bottom shell is light gray, the surface shell is dark gray, the overly gray tone appears calm and serious, the dark gray surface shell is printed with a deeper gray hammer LOGO "smartisan", the contrast is not high LOGO does not highlight, pay more attention to the overall sense, you have to look carefully to see what the word is.
Looking at the bottom, the bottom case is a lighter gray shell, and the entire panel is covered with 46 grooves to improve the feel.
In terms of the top layout, the far left is the power activation button, and the middle of the button has a pinhole that serves as an indicator light. The green, orange and red indicators show different corresponding power levels, that is, multiple states of a single light. In the middle is a regular Type-A output hole, nominal output performance: 5V3A/9V2A/12V1.5A, and the far right is a Type-C input interface, input performance: 5V3A/9V2A /12V1.5A.
The corresponding relationship between the power and the color of the indicator light: green indicates 70-100% of the remaining power, orange indicates 30-70% of the remaining power, red indicates 10-30% of the remaining power, and red flashes below 10%.
Bottom nameplate information, product name: 10000mAh two-way fast charging mobile power supply, model: P1000, input: 5V3A/9V2A/12V1.5A, output: 5V3A/9V2A/12V1.5A, battery capacity: 10000mAh/38.5Wh, manufacturer: Beijing Hammer Digital Technology Co., Ltd.
The weight of the hammer two-way mobile power supply body is 179.53g, and the hammer is really lightweight in the 10,000 mAh mobile power supply. (Other products of the same level weigh more than 200g)
Hammer P1000 head is also very petite, length, width and height are 132mm * 67mm * 12.8mm, and friends 10,000 mAh fast charging mobile power supply size and size comparison, from left to right are Meizu M10, Romas P10S, Huawei glory AP08Q, I hammer P1000, Xiaomi 2 PLM02ZM.
Previous page 123 Next page
Content navigation:
Disassembly article:
The disassembly method of the hammer first pulls the head out, and the raised shrapnel bayonet on the main body can be seen, which is fastened to the head cap.
The battery is fixed by the inner card slot, and a 4mm space is reserved with the shell to resist impact and avoid the danger of damage to the battery cell.
In terms of battery packs, the hammer mobile power supply uses a high-voltage & ultra-high-density battery codenamed M74 produced by Tianjin Lishen Battery, with a single-chip 10000mAh capacity of 38.5Wh and a full-charge voltage of 4.4V discharge platform of 3.85V.
Under the same volume, high-voltage high-density batteries can provide higher energy. Lishen’s high-voltage high-density batteries have a huge distribution volume. Most brands of high-end mobile power models will use Lishen 4.4V batteries, which shows that they are very mature and reliable and have won the trust of major manufacturers.
Battery pack PACK process, outsourcing white anti-wear adhesive paper, inside is white insulating barley paper and high temperature resistant tape, the safety is the best.
At a glance on the front of the PCB, we can see that the inductance of the hammer mobile power supply is larger than that of the common ones. The 10 * 10 inductance is 7 * 7 in the conventional mobile power supply. Three parallel low-resistance patch protection tubes can effectively reduce losses and improve efficiency during high-current charging and discharging.
PCB back list, the back of a large area of copper clad, there is a 1206 package of 10 milliohm alloy galvanometer, the battery is directly connected to the PCB by nickel strip spot welding.
In terms of the solution, Suzhou Yineng Micro EasePower EDP3016 was selected. EDP 3016 is a SOC chip for fast charging mobile power supply. It integrates a variety of fast charging protocols and can realize fast charging of mobile phones/mobile power supplies.
Integrated charge and discharge management inside the chip, led indicator light, battery overvoltage and overcharge protection, output overvoltage, under voltage, over current, short circuit protection. Adapter overvoltage, under voltage protection, battery temperature protection and other multiple protections.
A variety of sub-models can support 4.2V4.3V4.35V4.4V batteries with different full voltages, with a charging efficiency of 95% (measured at 12V1.5A), a discharge efficiency of 94% (measured at 12V1.5A), and a maximum charging current of 3A with a maximum discharge current of 3.4A.
Techcode American Ted Semiconductor *** 3307 low resistance MOS, the function is to output overcurrent protection, close Q1 when overcurrent to close the output.
Single inductor structure, one inductor can handle charging and discharging, and two Techcode low-resistance MOSs next to it are responsible for synchronous rectification and boosting.
The power-on activation button is wrapped with a circle of shading sponge, and a 3-color LED is placed in front of the button. The multi-color LED can display a variety of remaining power status with a single LED.
A copper sheet is welded on the PCB first, and then the nickel strip of the battery is spot welded to the copper sheet. The solder joints are firm and have no breakdown.
Content navigation:
Performance article:
Come to the performance section to see the powerful performance of the hammer two-way fast charging mobile power supply. Using the POWER-Z FL001 tester to monitor the input, even the most common conventional 5V input is as powerful, with an input power of 5.02V3.15A and 15.8W.
Next comes the output section, using the Power-Z KM001 tester to monitor the output of the hammer mobile power supply. The maximum output performance of 5V is 4.95V3.61A and 17.9W.
The hammer P1000 two-way fast charging mobile power supply is made of a three-color plastic shell, with no extra lines and no extra labels. The tone is white to gray, and the monochrome calm style is exceeded. The power button contains a three-color indicator light.
The interface uses conventional Type-A output + Type-C interface input, and the input supports a variety of fast charging specifications such as MTK PE, QC2.0, QC3.0, and high-power 5V. The maximum input power is 18.96W. In terms of output, fast charging supports QC2.0, QC3.0, and FCP output. The maximum output power is 24.84W, providing powerful performance.
The battery pack is selected from the M74 high-voltage ultra-high-density battery provided by Tianjin Lishen Battery, with a 4.4V full-charge discharge platform of 3.85V and a 10000mAh 38.5Wh, which can provide higher power under the same volume.
The solution uses the relatively rare SOC integration solution of Suzhou Yineng Microelectronics EASE POWER EDP3016 fast charging mobile power supply, integrates a variety of fast charging protocols, integrates charge and discharge management and multiple protection functions, and all MOSs use low-resistance MOSs to further improve efficiency.
The performance of the hammer mobile power supply is very powerful, and whether you can afford this "hammer" of Thor depends on consumers, whether the wallet power is strong enough (199 price).